Fan C

We’re planning on using some upcoming vacation time to do some home improvement projects… yes, it’s The Floor Project From Hell: Next Generation, and theoretically The Floor Project From Hell: Back To Bed. Part of that project will be adding 2 ceiling fans in the two “guest” bedrooms (with the help of a real electrician) and so today we went around looking at fans. There’s a place in the neighborhood that actually specializes in fans, so we went there first.

Interesting experience: it’s a small stripmall store front, absolutely stuff full of stacks and stacks of boxed ceiling fans. There is the usual overhead festival of fans, too. Finally, there were a number of people in the shop looking around, and 2 or maybe 3 salespeople. We were assured that they offered just as good discount prices as “the big box” stores, with better selection of higher-end fans. Well, okay, but our needs are pretty basic; one biggish fan, probably white, for the bigger guest bedroom, which has a vaguely summer-cottage look. And one smaller fan, for the very small third bedroom that was the featured player in said Floor Project for lo these 4 or more years. In the end, once we had the right tools (nailer for baseboards, a decent “fold and lock” floor product) it ended fairly quickly. So we’re hoping the sequels won’t be quite as horrible, and today’s visit to the fan store was part of the prep for the big push.

The saleswoman at the store was very helpful, gave us gobs of catalogs and brochures, and talked about which models are the big sellers/most popular with do-it-yourselfers (or with people looking to have someone else install them like us). She also mentioned that many of the large DIY retailers were going more for “house brands” and away from the name brands such as those she carried. We nodded and smiled and tried to look knowledgeable, and then went over to one of the big box stores to compare prices.

Interestingly, she was right about the big box place not carrying all the high-end models, and the no-name house brands, and so on. But we also found a couple of lower-end models that might suit just fine, still made by the one maker we like, Hunter (one of our other existing fans is a Casablanca, and we like that too).

We left the big box place without purchasing, though, because the guy “helping” us flipped through a pricing catalog when we asked if a different color was available, and he said off-handedly that the catalog prices were 3 years out of date. Then he said that anything on the shop floor was whatever price was marked, but special orders would be whatever the current “catalog rate” was. Not too helpful, and he took umbrage when David opined that it seemed like “bait-and-switch” to him. So we eggzitted, leaving the guy to mutter something that rhymed with “switch” in our wake.

Oh, boy! We’re already starting off with a bang! This’ll be epic!

So far, what we hope to accomplish during our staycation:

  1. Empty larger guest bedroom, move items into smaller guest bedroom
  2. Rip up carpet, remove baseboards
  3. Possibly touch up ceiling paint, walls are still fine
  4. Prep subfloor, put down underlayment
  5. Lay fold-and-lock floor (same color as in small bedroom)
  6. Stain and replace baseboards and shoe molding
  7. Move furniture back into room
  8. If time remains, dismantle/move master bedroom furniture in small room
  9. Repeat items 1-7, possibly with professional painting before laying floor

We’ll see if we get to the second room. The furniture in the guest room is a LOT lighter than that in the master bedroom, so there’s a likelihood we’ll be borrowing a handtruck to move the heavier pieces temporarily into the other rooms. But if we get the guest bedroom totally done, I’ll be satisfied.

Contact!

The second week of my attempt to get used to soft contact lenses begins. My eye doctor advised a different method, which causes me no end of frustration. This method seems easier to deal with.

Bausch & Lomb: Inserting and Removing Your Soft Contact Lenses

Inserting the lens into your eyes

1. You may want to rinse your lenses in a multi-purpose such as ReNu MultiPlus® Multi-Purpose Solution before you put them on.
2. Put one of the lenses on the tip of the index finger of the hand you write with. Be sure the lens is right-side-out (the edges should turn up, not out).
3. Look straight ahead. Pull down your lower eyelid with the middle finger of the same hand.
4. Pull the top lid up with the index finger of the other hand and look up.
5. Gently place the lens on the lower white of the eye.
6. Remove your index finger and release your eyelid.
7. Look down, and close your eyes for a moment. The lens will center itself.
8. Repeat for the other lens.

Removing the lens from your eye

1. You may want to use a lubricating and rewetting drop such as ReNu MultiPlus Lubricating and Rewetting Drops just before you remove your lenses. One or two drops in each eye will moisten the lenses and make them easier to remove.
2. Look up and pull the lower lid down with the middle finger of the hand you write with.
3. Place your index finger on the lower edge of your lens, and slide the lens down to the white of your eye.
4. Squeeze the lens lightly between your index finger and thumb and remove gently.
5. Repeat for the other eye.
6. If the edges of your lens stick together, place a few drops of saline or multi-purpose solution on the lens and rub gently until the edges separate.

Moon Landing Sites

Loving the pictures of the lunar landing sites being sent back… you can even see a footpath left by Apollo 14’s astronauts in one image.
BBC NEWS | Science & Environment | New images of Moon landing sites

_46080909_moon3_nasa466

Photo

A US spacecraft has captured images of Apollo landing sites on the Moon, revealing hardware and a trail of footprints left on the lunar surface.

The release of the images coincides with the 40th anniversary of the first manned mission to land on the Moon.

The descent stages from the lunar modules which carried astronauts to and from the Moon can clearly be seen.

The image of the Apollo 14 landing site shows scientific instruments and an astronaut footpath in the lunar dust.

It is the first time hardware left on the Moon by the Apollo missions has been seen from lunar orbit.

The pictures were taken by Nasa’s Lunar Reconnaissance Orbiter LRO spacecraft, which launched on 18 June.

I started wondering if it would be possible to see the tracks of the Lunar Rover on the larger images of Apollo 15/16/17, but only this one seems to show a faint straight line going from the landing site straight “east” and a little north. I don’t know if it’s a coincidental alignment of random shadows, or if it’s really the trail of the rover, but it heads toward the edge of a big crater, after what could be a course correction.

While looking for more information on the Lunar Rovers, I ran across something I missed last January. Check out this footage of “next year’s model” at this year’s Inaugural Parade. Man, it’s purdy and super-maneuverable… this isn’t your father’s Moon Buggy.

[kml_flashembed movie="http://www.youtube.com/v/2c2jN0k0k68" width="425" height="344" wmode="transparent" /]

I burst into tears watching this. I defy you not to do the same when one of the suited-up astronauts steps off the vehicle in front of the Presidential Reviewing Stand…